PTC Pro / Engineer Wildfire v4.0 (5.0) (часть 3)

anickolsky · month_9_short 6, 2011

TMshik said:
anickolsky, скажите пожалуйста ещё как установить WTBackup? Есть алгоритм установки? мне если чесна не понятно с чего начинать там. к примеру Windchill было не сложно установить нашел файл запуска и следовал пунктам, а тут такого нет. Заранее спасибо.

разархивировать... указать настройки в файле sitewtbackup.proeprties
все подробно в wtbackup.docx или wtbackupx.pdf

TMshik · month_9_short 6, 2011

anickolsky, 2. Изменить sitewtbackup.properties и изменить соответствующие значения свойств
3. Изменить wtbackup.bat
a. Установить WT_HOME
b. Установите JAVA_HOME
c. Активировать соответствующую команду резервного копирования, удалив бэр заявление
вообще не понятно на что менять все в п.2 на какие свойства менять что менять в п.3 конкретики нет не понятно что на что менять, как установить п.a и п.b, и где оно само backup-заявление? Поделитесь опытом пожалуйста. Заранее спасибо.

jonny · month_9_short 6, 2011

TMshik
anickolsky,
Ой, кажется мне Vitalik вас обоих вздрючит.. и за дело

NeoCimek · month_9_short 7, 2011

Hello,

It's possible to repost Windchill 10.0?

Thanks for advance.

proe · month_9_short 12, 2011

anickolsky said:
все возможно..
MathCAD 15 M005 http://gigapeta.com/dl/1307783a415361

Спасибо дружище!

yakamoto69 · month_9_short 15, 2011

creo 1.0 m010 medicine please

jonny · month_9_short 15, 2011

yakamoto69 said:
creo 1.0 m010 medicine please

You are looking "medicine" for not existing thing..

Creo 1.0 M010 will be released by PTC after 23 September

ronemun · month_9_short 15, 2011

Выложите, пожалуйста, литературу или краткую инструкцию по установке Windchill, с описанием как лечить желательно.

anickolsky · month_9_short 15, 2011

ronemun said:
Выложите, пожалуйста, литературу или краткую инструкцию по установке Windchill, с описанием как лечить желательно.

все на установочном диске.. там куча картинок. лечить не нужно

TMshik · month_9_short 19, 2011

anickolsky, в wtbackup изменил всё что было возможно установил все что нужно но он как нарочно ничего не копирует подскажите что делать?

anickolsky · month_9_short 19, 2011

TMshik said:
anickolsky, в wtbackup изменил всё что было возможно установил все что нужно но он как нарочно ничего не копирует подскажите что делать?

прислать файлы sitewtbackup.conf и wtbackup.bat

TMshik · month_9_short 20, 2011

anickolsky, я счас не на работе завтра к 10 утра выложу сюда оба файла

spa · month_9_short 20, 2011

Jonny said:
ProE WF4 M200

3-й файл от х64 отсутствует на сервере рапидшары. Можно ещё раз залить его туда, пожалуйста?

TMshik · month_9_short 21, 2011

anickolsky, sitewtbackup.properties:

#Options are aphelion,windchillds
ldap=\\usr\\var\\lde\\PTCLdap

#Windchill DS LDAP settings
#windchillds.directory=/ptc9.1/WindchillDS
#windchillds.logs.delete=true

#Aphelion settings
aphelion.logs.delete=true

#The backup directory can be on another server and you can use syntax like backup.dir=//server/wtbackup
backup.dir=I:

#If true will remove the previous backup before commencing
#Set this to false if doing an incremental backup
backup.dir.delete=false

#If true will zip the entire backup directory - could be lengthy!
backup.zip=false

#Possible options are full,incremental or false
#full copies all of the filevaults to the backup directory
#incremental uses robocopy to do an incremental backup. If you use incremental, make sure backup.dir.delete=false
filevaults.backup=incremental

#filevaults.removeunreferencedfiles=[true,false]
filevaults.removeunreferencedfiles=false
#Currently this only works with a single vault
filevaults.vaultname=defaultcachevault

#filevaults.folders must be relative to filevaults.basedir
#filevaults.basedir=c:/ptc
#filevaults.folders=Windchill_8.0/vaults/defaultcachevault,mastercontentfolder1,ReplicationFolder
filevaults.basedir=${windchill.home.directory}
#If using filevaults.backup=incremental then by default the folder specified here will be backed up recursively
#If using filevaults.backup=full then you must use ant syntax to work recursively, e.g. vault/** will recursively backup all files under the folder ${filevaults.basedir}/vaults
filevaults.folders=vaults

#Executes listVaultFiles.sql to list all of the vaulted files cross referencing their path on the OS with their document name and number. Output is zipped under ${backup.dir}/<SUBDIR>/listVaultFiles
#These scripts do not work for pdmlink 8, so if you are using this version then set list.vault.files=false
list.vault.files=true
mailhost=int-mail.ptcnet.ptc.com
[email protected]
#Comma delimited list
[email protected]

wvs.backup=false
#semi colon delimited list of worker directories
wvs.worker.directory=I:\ptc\Windchill_9.0\Windchill\wvs
wvs.backup.files=monitor_*.log,helper_*.log,worker_*.log,trail.txt.*,std.out
wvs.logs.delete=true
#Log files older than this number of days will be deleted
wvs.remove.older.than=1

windchill.stop=windchill stop
#windchill.stop=net stop wt8
windchill.start=windchill start
#windchill.start=net start wt8
windchill.logs.delete=true
#The list of files here will all be backed up. All paths are relative to windchill.home.directory
#Note that the ** allows you to backup a whole directory structure, like wtCustom/**
windchill.backup.conffiles=logs/*.*,*.xconf,codebase/*.properties,codebase/*.xconf,db/db.*,codebase/WEB-INF/*.*,tasks/wt/federation/*.xml,wtSafeArea/**,wtCustom/**,codebase/*.ini,codebase/com/ptc/windchill/cadx/cfg/**,codebase/instreg/**

#Windchill installer
#The Windchill PSI installer depends on the existence of the installer global registry files
#See Windchill® Installation and Configuration Guide Advanced for further details
#These files are backed up but not automatically restored you need to restore them manually if required
#installer.registry.drive1=d:/
#installer.registry.files1=User Profiles/dxd.PTCNET/Application Data/PTC/Windchill/*.xml
installer.registry.drive2=I:/
installer.registry.files2=ptc/Windchill_9.0/ocu/installer/instreg/registry

#Needed when calling RemoveUnreferencedFilesFromVault
windchill.admin.user=wcadmin
windchill.admin.password=wcadmin

#Options are oracle,mssql
rdbms=oracle

#Microsoft SQL Server commands
#This section only used if rdbms=mssql
#mssql.sqlcmd.dir=D:/PTC/Microsoft SQL Server/90/Tools/Binn
#mssql.sqlcmd.exe=SQLCMD.EXE
#mssql.system.user=sa
#mssql.system.password=wcadmin
#First component in wt.pom.serviceName in db.properties
# e.g. if the db.properties entry is wt.pom.serviceName=//VWENZELPDS\\VWENZEL\:1433;DatabaseName\=wind
#then mssql.server=VWENZELPDS\\VWENZEL
#mssql.server=VWENZELPDS\\VWENZEL
#Third component in wt.pom.serviceName in db.properties
# e.g. if the db.properties entry is wt.pom.serviceName=//VWENZELPDS\\VWENZEL\:1433;DatabaseName\=wind
#then mssql.dbname=wind
#mssql.dbname=wind
#End:This section only used if rdbms=mssql

#This section only used if rdbms=oracle
oracle.system.user=system
oracle.system.password=manager
oracle.service.name=wtremote
oracle.home=I:/oracle
#The only argument for the oracle.export and oracle.import parrameters you are likely to change is the PARALLEL=, see Oracle documentation for advice
oracle.export.wt=${oracle.home}/bin/expdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${wt.pom.dbUser} DIRECTORY=wtbackup LOGFILE=expdp.log PARALLEL=4 DUMPFILE=wtschema_%U.dmp
oracle.import.wt=${oracle.home}/bin/impdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${wt.pom.dbUser} DIRECTORY=wtbackup LOGFILE=impdp.log PARALLEL=4 DUMPFILE=wtschema_%U.dmp
#wtschema.datapump.directory is the path *accessible from the oracle server* to the oracle backup directory.Because Oracle is likely to be on a different server than Windchill we can't assume that this is based on %{backup.dir}
wtschema.datapump.localpath=i:/wtbackup/wtbackup/oracle
cognos.datapump.localpath=i:/wtbackup/wtbackup/cognos
#End: This section only used if rdbms=oracle

apache.home.directory=I:\ptc\Windchill_9.0\Apache
#apache.start=net start Apache2
#apache.start=${apache.home.directory}/bin/Apache.exe
apache.start=${apache.home.directory}/bin/httpd.exe
#apache.stop=net stop Apache2
#apache.stop=taskkill /im Apache.exe /f
apache.stop=taskkill /im httpd.exe /f
apache.logs.delete=true

tomcat.home.directory=I:\ptc\Windchill_9.0\Tomcat
#tomcat.start=net start Tomcat
tomcat.start=${tomcat.home.directory}/bin/wttomcat_start.bat
#tomcat.stop=net stop Tomcat
tomcat.stop=${tomcat.home.directory}/bin/wttomcat_stop.bat
tomcat.logs.delete=true

########################################
#Windchill 9 options
########################################

#Cognos backup is currently *only* supported on Oracle
cognos.backup=false

#The only place I can find these is in a file called WTHOME\Reporting\configuration\cogstartup_20080103190637.xml which varies from machine to machine
cognos.username=wbradmin
cognos.password=wbradmin
cognos.stop=net stop "Cognos 8"
cognos.start=net start "Cognos 8"
oracle.export.cognos=${oracle.home}/bin/expdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${cognos.username} DIRECTORY=cognosbackup LOGFILE=expdp.log PARALLEL=4 DUMPFILE=cognosschema_%U.dmp
oracle.import.cognos=${oracle.home}/bin/impdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${cognos.username} DIRECTORY=cognosbackup LOGFILE=expdp.log PARALLEL=4 DUMPFILE=cognosschema_%U.dmp
#The logs will only be deleted if cognos.backup is set to true
cognos.logs.delete=true
cognos.home.directory=I:/backups/wtbackup/cognos
cognos.backup.files=logs/**/*.*
cognos.logs.directory=${cognos.home.directory}/logs

########################################
#Restore options
########################################
#This is the directory containing the backup that will be restored from
restore.source.dir=I:\ptc\Windchill_9.0\Windchill
#this will restore all backed up windchill config files, like wt,properties, site.xconf etc.
restore.config.files=true

#If false the filevaults will not be restored, *be careful* restoring filevaults deletes existing file vaults before copying backup.
filevaults.restore=true

:end

wtbackup.bat:

set WT_HOME=I:\ptc\Windchill_9.0\Windchill
set JAVA_HOME=I:\ptc\Windchill_9.0\Java
set PATH=%WT_HOME%\bin;%WT_HOME%\ant\bin;%JAVA_HOME%\bin;%PATH%

rem setting the Java heap is necessary when running listVaultFiles - if you get an OutofMemoryError then increase this value.
set ANT_OPTS=-Xmx512m

if "%1"=="" goto wtbackup
if "%1"=="restore" goto wtrestore
if "%1"=="test" goto wttest

:wtbackup
rem *****Activate one of the next 3 statements to perform a backup
rem ***Incremental backup of filevaults
call ant -f wtbackup.xml all -Dfilevaults.backup=incremental -Dbackup.dir.delete=false -Dwindchill.home.directory=%WT_HOME% -lib .

rem ***Full backup of filevaults
rem call ant -f wtbackup.xml all -Dfilevaults.backup=full -Dbackup.dir.delete=false -Dwindchill.home.directory=%WT_HOME% -lib .

rem ***No backup of filevaults
rem call ant -f wtbackup.xml all -Dfilevaults.backup=false -Dbackup.dir.delete=true -Dwindchill.home.directory=%WT_HOME% -lib .

rem ***To receive an email of the log file make sure you activate the next line
ant -f emaillog.xml -Dwindchill.home.directory=%WT_HOME% -lib .
goto end

:wtrestore
rem restore.source.dir is relative to wherever this script is being run from
rem wtschema.datapump.localpath is relative to the Oracle server
ant -f wtbackup.xml restore -Drestore.source.dir=I:\backups -Dwtschema.datapump.localpath=I:\backups\wtbackup.good\oracle -Drestore.config.files=true -Dwindchill.home.directory=%WT_HOME% -lib .
goto end

:wttest
rem ******** Various test scripts
rem call ant -f wtbackup.xml createOraDirectory -Doradirectory.user=wtremote -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testOracleConnections -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml showLocalTimeFormat -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWVS -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml removeUnreferencedFiles -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justMssql -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWindchill -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWindchillConf -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWindchillDS -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml restoreLDAP -Dwindchill.home.directory=%WT_HOME% -lib . -Drestore.source.dir=D:\ptc9.1\backups\Not_quite_empty
rem call ant -f wtbackup.xml justOracle -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justApache -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justTomcat -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justFileVaults -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testmail -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testbackup -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml listVaultFiles -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testcmd -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml t12 -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml removeUnreferencedFiles -Dwindchill.admin.user=wcadmin -Dwindchill.admin.password=wcadmin -Dwindchill.fv.vault=defaultcachevault -DremoveUnreferencedFiles=true -Dwindchill.home.directory=%WT_HOME% -lib .

rem **** Writes the vaults to be backed up to ${windchill.home.directory}/logs/MountInfo.log. Requires Windchill to be running.
rem call ant -f wtbackup.xml mountInfo -Dwindchill.admin.user=wcadmin -Dwindchill.admin.password=wcadmin

:end

Объясните что такое Windchill DS?

Кстати в wtbackup.bat в подразделе :wtrestore я прописал путь откуда будет производиться восстановление, но программа удалила мою папку, создав свою, хотя у мя все настройки были на мою папку сделаны. Помогите решить данные проблемы. Заранее спасибо.

Ramencox · month_9_short 21, 2011

spa said:
3-й файл от х64 отсутствует на сервере рапидшары. Можно ещё раз залить его туда, пожалуйста?

h-ttp://ifile.it/wz6br9n/WF4_win64_M200_3OF5.zip
h-ttp://ifile.it/zyg5eiv/WF4_win64_M200_5OF5.zip

spa · month_9_short 21, 2011

gv-74 said:
h-ttp://ifile.it/wz6br9n/WF4_win64_M200_3OF5.zip

Благодарю!
Оказывается, WF4_win64_M200_5OF5 тоже отсутствует на сервере. Если не сложно

Его тоже можно туда же?

jonny · month_9_short 21, 2011

spa said:
Благодарю!
Оказывается, WF4_win64_M200_5OF5 тоже отсутствует на сервере. Если не сложно Его тоже можно туда же?

"Дяденька! Дай попить, а то так есть хочется, что даже переночевать негде..."

anickolsky · month_9_short 21, 2011

Creo Parametric 1.0 M010 официальный + help
0. http://gigapeta.com/dl/1821287a4d162a Help Center

1.

http://gigapeta.com/dl/1821340a8a414d

2.

http://gigapeta.com/dl/1821367a39f68d

3.

http://gigapeta.com/dl/1821385af81cec

4.

http://gigapeta.com/dl/1821397aab1328

5.

http://gigapeta.com/dl/1821414aaee0a6

6.

http://gigapeta.com/dl/1821418acc9227

7.

http://gigapeta.com/dl/1821419a1377c7

anickolsky · month_9_short 21, 2011

TMshik said:
anickolsky, sitewtbackup.properties:

#Options are aphelion,windchillds
ldap=\\usr\\var\\lde\\PTCLdap

#Windchill DS LDAP settings
#windchillds.directory=/ptc9.1/WindchillDS
#windchillds.logs.delete=true

#Aphelion settings
aphelion.logs.delete=true

#The backup directory can be on another server and you can use syntax like backup.dir=//server/wtbackup
backup.dir=I:

#If true will remove the previous backup before commencing
#Set this to false if doing an incremental backup
backup.dir.delete=false

#If true will zip the entire backup directory - could be lengthy!
backup.zip=false

#Possible options are full,incremental or false
#full copies all of the filevaults to the backup directory
#incremental uses robocopy to do an incremental backup. If you use incremental, make sure backup.dir.delete=false
filevaults.backup=incremental

#filevaults.removeunreferencedfiles=[true,false]
filevaults.removeunreferencedfiles=false
#Currently this only works with a single vault
filevaults.vaultname=defaultcachevault

#filevaults.folders must be relative to filevaults.basedir
#filevaults.basedir=c:/ptc
#filevaults.folders=Windchill_8.0/vaults/defaultcachevault,mastercontentfolder1,ReplicationFolder
filevaults.basedir=${windchill.home.directory}
#If using filevaults.backup=incremental then by default the folder specified here will be backed up recursively
#If using filevaults.backup=full then you must use ant syntax to work recursively, e.g. vault/** will recursively backup all files under the folder ${filevaults.basedir}/vaults
filevaults.folders=vaults

#Executes listVaultFiles.sql to list all of the vaulted files cross referencing their path on the OS with their document name and number. Output is zipped under ${backup.dir}/<SUBDIR>/listVaultFiles
#These scripts do not work for pdmlink 8, so if you are using this version then set list.vault.files=false
list.vault.files=true
mailhost=int-mail.ptcnet.ptc.com
[email protected]
#Comma delimited list
[email protected]

wvs.backup=false
#semi colon delimited list of worker directories
wvs.worker.directory=I:\ptc\Windchill_9.0\Windchill\wvs
wvs.backup.files=monitor_*.log,helper_*.log,worker_*.log,trail.txt.*,std.out
wvs.logs.delete=true
#Log files older than this number of days will be deleted
wvs.remove.older.than=1

windchill.stop=windchill stop
#windchill.stop=net stop wt8
windchill.start=windchill start
#windchill.start=net start wt8
windchill.logs.delete=true
#The list of files here will all be backed up. All paths are relative to windchill.home.directory
#Note that the ** allows you to backup a whole directory structure, like wtCustom/**
windchill.backup.conffiles=logs/*.*,*.xconf,codebase/*.properties,codebase/*.xconf,db/db.*,codebase/WEB-INF/*.*,tasks/wt/federation/*.xml,wtSafeArea/**,wtCustom/**,codebase/*.ini,codebase/com/ptc/windchill/cadx/cfg/**,codebase/instreg/**

#Windchill installer
#The Windchill PSI installer depends on the existence of the installer global registry files
#See Windchill® Installation and Configuration Guide Advanced for further details
#These files are backed up but not automatically restored you need to restore them manually if required
#installer.registry.drive1=d:/
#installer.registry.files1=User Profiles/dxd.PTCNET/Application Data/PTC/Windchill/*.xml
installer.registry.drive2=I:/
installer.registry.files2=ptc/Windchill_9.0/ocu/installer/instreg/registry

#Needed when calling RemoveUnreferencedFilesFromVault
windchill.admin.user=wcadmin
windchill.admin.password=wcadmin

#Options are oracle,mssql
rdbms=oracle

#Microsoft SQL Server commands
#This section only used if rdbms=mssql
#mssql.sqlcmd.dir=D:/PTC/Microsoft SQL Server/90/Tools/Binn
#mssql.sqlcmd.exe=SQLCMD.EXE
#mssql.system.user=sa
#mssql.system.password=wcadmin
#First component in wt.pom.serviceName in db.properties
# e.g. if the db.properties entry is wt.pom.serviceName=//VWENZELPDS\\VWENZEL\:1433;DatabaseName\=wind
#then mssql.server=VWENZELPDS\\VWENZEL
#mssql.server=VWENZELPDS\\VWENZEL
#Third component in wt.pom.serviceName in db.properties
# e.g. if the db.properties entry is wt.pom.serviceName=//VWENZELPDS\\VWENZEL\:1433;DatabaseName\=wind
#then mssql.dbname=wind
#mssql.dbname=wind
#End:This section only used if rdbms=mssql

#This section only used if rdbms=oracle
oracle.system.user=system
oracle.system.password=manager
oracle.service.name=wtremote
oracle.home=I:/oracle
#The only argument for the oracle.export and oracle.import parrameters you are likely to change is the PARALLEL=, see Oracle documentation for advice
oracle.export.wt=${oracle.home}/bin/expdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${wt.pom.dbUser} DIRECTORY=wtbackup LOGFILE=expdp.log PARALLEL=4 DUMPFILE=wtschema_%U.dmp
oracle.import.wt=${oracle.home}/bin/impdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${wt.pom.dbUser} DIRECTORY=wtbackup LOGFILE=impdp.log PARALLEL=4 DUMPFILE=wtschema_%U.dmp
#wtschema.datapump.directory is the path *accessible from the oracle server* to the oracle backup directory.Because Oracle is likely to be on a different server than Windchill we can't assume that this is based on %{backup.dir}
wtschema.datapump.localpath=i:/wtbackup/wtbackup/oracle
cognos.datapump.localpath=i:/wtbackup/wtbackup/cognos
#End: This section only used if rdbms=oracle

apache.home.directory=I:\ptc\Windchill_9.0\Apache
#apache.start=net start Apache2
#apache.start=${apache.home.directory}/bin/Apache.exe
apache.start=${apache.home.directory}/bin/httpd.exe
#apache.stop=net stop Apache2
#apache.stop=taskkill /im Apache.exe /f
apache.stop=taskkill /im httpd.exe /f
apache.logs.delete=true

tomcat.home.directory=I:\ptc\Windchill_9.0\Tomcat
#tomcat.start=net start Tomcat
tomcat.start=${tomcat.home.directory}/bin/wttomcat_start.bat
#tomcat.stop=net stop Tomcat
tomcat.stop=${tomcat.home.directory}/bin/wttomcat_stop.bat
tomcat.logs.delete=true

########################################
#Windchill 9 options
########################################

#Cognos backup is currently *only* supported on Oracle
cognos.backup=false

#The only place I can find these is in a file called WTHOME\Reporting\configuration\cogstartup_20080103190637.xml which varies from machine to machine
cognos.username=wbradmin
cognos.password=wbradmin
cognos.stop=net stop "Cognos 8"
cognos.start=net start "Cognos 8"
oracle.export.cognos=${oracle.home}/bin/expdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${cognos.username} DIRECTORY=cognosbackup LOGFILE=expdp.log PARALLEL=4 DUMPFILE=cognosschema_%U.dmp
oracle.import.cognos=${oracle.home}/bin/impdp ${oracle.system.user}/${oracle.system.password}@${oracle.service.name} SCHEMAS=${cognos.username} DIRECTORY=cognosbackup LOGFILE=expdp.log PARALLEL=4 DUMPFILE=cognosschema_%U.dmp
#The logs will only be deleted if cognos.backup is set to true
cognos.logs.delete=true
cognos.home.directory=I:/backups/wtbackup/cognos
cognos.backup.files=logs/**/*.*
cognos.logs.directory=${cognos.home.directory}/logs

########################################
#Restore options
########################################
#This is the directory containing the backup that will be restored from
restore.source.dir=I:\ptc\Windchill_9.0\Windchill
#this will restore all backed up windchill config files, like wt,properties, site.xconf etc.
restore.config.files=true

#If false the filevaults will not be restored, *be careful* restoring filevaults deletes existing file vaults before copying backup.
filevaults.restore=true

:end

wtbackup.bat:

set WT_HOME=I:\ptc\Windchill_9.0\Windchill
set JAVA_HOME=I:\ptc\Windchill_9.0\Java
set PATH=%WT_HOME%\bin;%WT_HOME%\ant\bin;%JAVA_HOME%\bin;%PATH%

rem setting the Java heap is necessary when running listVaultFiles - if you get an OutofMemoryError then increase this value.
set ANT_OPTS=-Xmx512m

if "%1"=="" goto wtbackup
if "%1"=="restore" goto wtrestore
if "%1"=="test" goto wttest

:wtbackup
rem *****Activate one of the next 3 statements to perform a backup
rem ***Incremental backup of filevaults
call ant -f wtbackup.xml all -Dfilevaults.backup=incremental -Dbackup.dir.delete=false -Dwindchill.home.directory=%WT_HOME% -lib .

rem ***Full backup of filevaults
rem call ant -f wtbackup.xml all -Dfilevaults.backup=full -Dbackup.dir.delete=false -Dwindchill.home.directory=%WT_HOME% -lib .

rem ***No backup of filevaults
rem call ant -f wtbackup.xml all -Dfilevaults.backup=false -Dbackup.dir.delete=true -Dwindchill.home.directory=%WT_HOME% -lib .

rem ***To receive an email of the log file make sure you activate the next line
ant -f emaillog.xml -Dwindchill.home.directory=%WT_HOME% -lib .
goto end

:wtrestore
rem restore.source.dir is relative to wherever this script is being run from
rem wtschema.datapump.localpath is relative to the Oracle server
ant -f wtbackup.xml restore -Drestore.source.dir=I:\backups -Dwtschema.datapump.localpath=I:\backups\wtbackup.good\oracle -Drestore.config.files=true -Dwindchill.home.directory=%WT_HOME% -lib .
goto end

:wttest
rem ******** Various test scripts
rem call ant -f wtbackup.xml createOraDirectory -Doradirectory.user=wtremote -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testOracleConnections -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml showLocalTimeFormat -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWVS -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml removeUnreferencedFiles -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justMssql -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWindchill -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWindchillConf -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justWindchillDS -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml restoreLDAP -Dwindchill.home.directory=%WT_HOME% -lib . -Drestore.source.dir=D:\ptc9.1\backups\Not_quite_empty
rem call ant -f wtbackup.xml justOracle -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justApache -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justTomcat -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml justFileVaults -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testmail -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testbackup -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml listVaultFiles -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml testcmd -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml t12 -Dwindchill.home.directory=%WT_HOME% -lib .
rem call ant -f wtbackup.xml removeUnreferencedFiles -Dwindchill.admin.user=wcadmin -Dwindchill.admin.password=wcadmin -Dwindchill.fv.vault=defaultcachevault -DremoveUnreferencedFiles=true -Dwindchill.home.directory=%WT_HOME% -lib .

rem **** Writes the vaults to be backed up to ${windchill.home.directory}/logs/MountInfo.log. Requires Windchill to be running.
rem call ant -f wtbackup.xml mountInfo -Dwindchill.admin.user=wcadmin -Dwindchill.admin.password=wcadmin

:end

Объясните что такое Windchill DS?

Кстати в wtbackup.bat в подразделе :wtrestore я прописал путь откуда будет производиться восстановление, но программа удалила мою папку, создав свою, хотя у мя все настройки были на мою папку сделаны. Помогите решить данные проблемы. Заранее спасибо.

#Options are aphelion,windchillds !!!!
ldap=\\usr\\var\\lde\\PTCLdap
какого же тут стоит \\usr\\var\\lde\\PTCLdap???
или aphelion или windchillds должно же быть
WindchillDS это замена Aphelion в 9.1 и далее

wxf3792 · month_9_short 22, 2011

med-100win-cd-380_m010_win32-64.001
not end, others?

PTC Pro / Engineer Wildfire v4.0 (5.0) (часть 3)

anickolsky

TMshik

Member

jonny

Member

NeoCimek

New member

proe

New member

yakamoto69

Member

jonny

Member

ronemun

Member

anickolsky

TMshik

Member

anickolsky

TMshik

Member

spa

Member

TMshik

Member

Ramencox

Member

spa

Member

jonny

Member

anickolsky

anickolsky

wxf3792

Member